General

Questions about which product to use and the use and function of our anti-corrosion products.

Which anti-corrosion product do I need?
deox-C makes up a bath which is perfect for items that can be submerged. deox-gel clings to the surface for use on corrosion that cannot be submerged in a b...
Fri, 21 Dec, 2018 at 11:43 AM
I need to treat some stone chips, should I use hydrate 80 or do you recommend another product before touching up with paint?
The best treatment is to completely remove the corrosion with deox gel. Follow this with a coat of electrox.
Fri, 21 Dec, 2018 at 11:54 AM
What is the differences between dynax UB, UC and S-50?
dynax UB, dynax UC and dynax S-50 are wax-like coatings to provide protection from corrosion in areas such as the underside of your car and box sections. UB...
Fri, 21 Dec, 2018 at 12:02 PM
How much dynax UB/UC do I need?
It typically takes 4 x 750ml aerosols to completely treat a medium sized vehicle. 1litre of product typically covers 8-10 square metres when applied by brus...
Wed, 19 Sep, 2018 at 3:14 PM
HOW TO: Protect a vehicle with a rusted underside.
There are two methods to do this, one is for thorough, robust protection, the other is quicker and simply provides a layer of wax protection.   For maximu...
Fri, 21 Dec, 2018 at 12:06 PM
HOW TO: de-rust and further protect a vehicle fuel tank.
Use deox-C to clear the rust, rinse with water and dry with compressed or warm air gun after treatment. Fill the tank with petrol as soon as you can, if thi...
Fri, 21 Dec, 2018 at 12:12 PM
HOW TO: Prevent re-rusting on a surface treated with a corrosion removal product before painting? (For example, a large project worked on in stages.)
Surfaces that have been stripped of rust by a rust removal products (such as deox-C and deox-GEL) or by mechanical means, are susceptible to flash corrosion...
Fri, 21 Dec, 2018 at 12:22 PM
Which of your products should I use to protect the inside of my arches against salt etc?
Our wax-based anticorrosives are best for this. If the arches have liners remove them clean out any mud or debris then apply dynax S50, on areas not cov...
Fri, 21 Dec, 2018 at 12:27 PM
The old sealer on my wheel arches has come off and they now have surface rust in this area, how should I treat this?
Remove the old coating completely and grind back with abrasive, then use deox Gel repeatedly until steel is clean. After this, apply electrox, and top with ...
Fri, 21 Dec, 2018 at 12:30 PM
HOW TO: treat rusted wheel arches.
There may be a build-up of muck around the inner wheel arch lip. Remove any plastic liners and clean it back. With abrasive, remove all existing coating...
Fri, 21 Dec, 2018 at 1:27 PM